separatori di gocce per torri evaporative e depurazione acque

Panel Type Drift Eliminators and Blade type Droplet Eliminators

Filling Technologies produces a wide range of Drift Eliminators Systems for evaporation or cooling towers and droplet eliminatros for air treatment units, for scrubbers and for ventilation systems.

The Drift Eliminators System's primary function is to separate the water droplets contained in the vertical (modular panel separators) or horizontal (winged separators) air flows.

Filling Technologies has been on the market for over 30 years.  Thanks to the experience is acquired over the years, its range of products now include the most efficient Drift Eliminator Systems that are available on the market in terms of separation and thermo-mechanical resistance. 

Prior to thermoforming or extrusion, our PVC and PP are provided by top European and international companies and they meet the American surface burning characteristics of building material standards, CTI 136 and ASTM E-84.

The drift eliminator is mainly used to separate drops of water present in the air flow both for vertical flows (modular panel separators) and for horizontal flows (fin-type separators).

Filling Technologies sells 2 types of separators:

The H 130 - Drift 130 - Mist 140 drift eliminatros are called "Panel type" and specifically designed for use in evaporative towers, scrubbers and gas turbines.
The Droplet separators F10 - F20 - F33 - F40 are called "Blade type" and designed for use in air handling units, scrubbers, gas turbines and spray booths.
On request The drop separators of the F series can be supplied on an aluminum frame.

Main Advantages

• Reduced environmental impact
• Elimination of water drop issues
• no water drops come out of the system
• Water recovery
• Energy saving
• Increased amount of drops that are deposited in collection areas
• Very low head losses
• High mechanical resistance thanks to the PVC
• Easy maintenance
• Panels are intelligently positioned thanks to their lightness
• Resistant against almost all chemical and biological agents

Panel Type Drift Eliminators

H 130

This type of Drift eliminator, with a geometry based upon 2 changes in the discharge airflow direction, is applied principally in situations of vertical airflow but can also be used for crossflow applications: it is constructed from pre-formed PVC sheets, subsequently made up into panels...

DRIFT 130

This type of Drift eliminator, with a geometry based upon 4 changes in the discharge airflow direction, is applied in situations of vertical airflow : it is constructed from pre-formed PVC sheets, subsequently made up into panels.

MIST 140

This type of Drift eliminator, with a sinusoidal geometry based upon 3 changes in the discharge airflow direction, is applied principally in situations of vertical airflow but can also be used for cross-flow applications: it is constructed from preformed PVC sheets.

H 200

The H 200 drift eliminator with a geometry based upon 4 changes in the discharge airflow direction, the drift eliminator air travel height is 200 mm, is applied principally in situations of vertical airflow but can also be used for crossflow applications: it is constructed from preformed PVC sheets, subsequently made up into panels.

H 260 

The H 260 drift eliminator, with a geometry based upon 4 changes in the discharge airflow direction, the drift eliminator air travel height is 260 mm, is applied principally in situations of vertical airflow but can also be used for crossflow applications: it is constructed from preformed PVC sheets, subsequently made up into panels.

CELLDRIFT 140

CellDrift 140 is made of solvent-bonded sheets of self-extinguishing, thermoformed PVC. Its unique design controls the drift’s flow and results in high mechanical strength.

WATER DROP 160

The WATER DROP 160 drift elininator, with a geometry based upon 3 changes in the discharge airflow direction, is applied in situations of vertical airflow : it is constructed from preformed PP sheets, subsequently made up into panels.

MUNDROP

Mundrop drift eliminators are designed specifically for vertical flow evaporative towers.
It is an extruded and extremely consistent product and therefore self-supporting. Made of PVC and assembled using PP spacers...

Blade Type Droplet Separators

F 10

The F10 Droplet separator is a profile for vertical fitment in a horizontal airflow, produced by the extrusion of high quality polypropylene (alternatively PVC or aluminium), reinforced with talc...

F 20

The F20 Droplet separator is a profile for vertical fitment in a horizontal airflow, produced by the extrusion of high quality polypropylene (alternatively PVC or aluminium), reinforced with talc...

F 33

The F33 Droplet separator is a profile for vertical fitment in a horizontal airflow, produced by the extrusion of high quality polypropylene (alternatively PVC or aluminium), reinforced with talc...

F 40

The F40 Droplet separator is a profile for vertical fitment in a horizontal airflow, produced by the extrusion of high quality polypropylene (alternatively PVC or aluminium), reinforced with talc...

FRAME AND ACCESSORIES

The FRAMES can be made of galvanized steel, aluminum, stainless steel 304 or 316 L, thanks to their robust construction they give sturdiness to the whole structure. FIXING accessories are available with 25 mm or 33 mm pitch and they are used as intermediate spacers for eliminator blades.